Long Bits Box for Sleeved Card Game Organizer

I bought this organizer years ago at a convention and used it for random bits and game pieces. Then I picked up a copy of Trade on the Tigris, which has many small card decks and this organizer fit PERFECTLY in the box. I ended up ordering 2 more and it's been very helpful for keeping the decks separated without having to use little baggies which speeds up setup/cleanup times considerably for the game! Will likely be buying more of these in the future.

The box once assembled is pretty much what I expected and is good. I’m using it to store the tokens for a board game and it works well for that. The quality once assembled is pretty good. It holds together without an issue and no glue was needed. The fit was a bit of a problem on assembly. The tabs didn’t fit well. I had to use a mallet on all the dividers except one. I didn’t have any sand paper to try filing down the tabs so they all haven’t gone into their slots at the same level so the lid doesn’t close as easily as I would have hoped.

This bits box is a great addition to the unsleeved card game organizer. It allows us to hop into the game much quicker without having to pull the bits out of each of their bags.

Long Bits Box for Sleeved Card Game Organizer

Submitting review so I stop getting emails asking to submit a review

Love these they are so.handy

Great product. Easy to assemble.

Perfect for what I need it for

Even a great company like The Broken Token can make inserts for every single boardgame in existence. Fortunately, on the rare occasion that I've had a game that isn't in their catalog I've been able to use inserts like these. Using this for Wayward, it helps with the many tokens that would otherwise be rattling all over the place.

This is a super box for holding tokens. If there are more tokens than will fit in one section, I just left a divider out. And the fit in the center section of the card holder

Bought couple of these to help me get some of my X-Wing sprawl under control and make it easier to find all the tokens needed for that game. Putting these together was super simple and fast, and now I can find a new purpose for the roughly 3-dozen bags that were corralling my X-Wing tokens before. The fact that these drop in to space in some of their other organizers is a huge plus.

I'm using it for the tokens in Mansions of Madness. It fits nicely in the box and hold all of them.

Meets my needs.

So many uses for this little bit box.....will be great for storage of small pieces but also a great feature for in game play. Will be buying more of these for use in many games

Works good for what I needed. really like the lid design.

Good quality, easy to assemble, looks fantastic.

Great box, easy to put together. Holds my game pieces for a game with a lot of little things. Highly recommend.

I ordered two of these to store my Mansions of Madness tokens. This is exactly what I needed. Easily holds and organizes all of the tokens. It even has room for expansions! This is a game changer.

I have 4 of these, 1 for netrunner one for arkham horror cg, two for armada all of them are good, but the most recent one i got fits uncomfortably loose compared to the others. i ended up using a bit of wood glue and it looks and feels great, as good as the others. I use them to organize tokens and mini cards and for armada for full size and oversize cards too

I bought two of these long bits boxes for our Darkhorse board game. They fit perfectly in the original box with a nice 'channel' down the middle for the larger pieces (see BGG entry from the game designer for photos). The laser cutting is absolutely PERFECT. The parts fit together with just a little smack from a rubber mallet. So good that I question whether you need any glue. I did use thin CA (super glue) after assembly wicked into the joints to make sure though. I am very pleased with the quality of this product and recommend it HIGHLY. I'll be looking to buy more products from Broken Token in the future.

Bought this to go with my sleeved card game organizer. It does exactly what it says it will. Not really much more to say about it. If you need extra bits storage this does the trick!

I currently have two of these long bits boxes. Both I use with the sleeved card game organizer. I use it for Ashes: Rise of the Phoenixborn and Netrunner. In Ashes: I placed all the dice from 1 copy of the base game as well as all the tokens. That filled it up, so if I got more dice, I'd have to find another place to store them. It works perfectly for that game and makes sorting everything a breeze. In Netrunner: I placed all the tokens and again it's wonderful. I doubled up some tokens in some of the bin slots because I also have a few acryllic counters to go with it, but it's a great solution. Highly Recommended! The one thing I'd change is for an ability to lock the top of the bit box in place in case I used it outside of the center tray of the sleeved card game organizer.

I was looking for a box to hold all the little tokens from Sentinels of the Multiverse (base game) and this one not only fit GREAT in the box I was also able to fit all the tokens on it/ I place the bit box in 1/2 side of the box and all the game cards on the other 1/2. Boy headaches erased by this bit box!

I purchased this for a coin box for my upgraded Powergrid set I am creating. Works perfectly to hold coins and markers.

I really like this product for use with Netrunner. I use it to store the tokens in a core box with the sleeved organizer. I like the way the lid slides on and off. The wood is a good Birch (I think) that is finely sanded. It's light but sturdy for it's weight (it is NOT balsa wood like what those flimsey hobby planes are made of). The only improvement that could be made is that a couple of corner joints were a little lose. I used wood glue to ensure it wouldn't come a part (quick and easy to slide a dab of glue in the corners while assembled and pick up the excess with a wet paper towel). I can understand the need for this with assembled wood pieces.

I have another storage solution for my LCG and bought this as a way to carry around just the tokens. This organizer was designed to be put into an LCG box and won't hold together without wood glue. The material is nice though.

I'm using one of these for all the small tokens from Eldritch Horror. Works great.

Good quality, easy to assemble. Used wood glue to hold it together. At times a rubber mallet was helpful to get everything tight. Used two of these and I could store all of the pieces for Flashpoint and all of its expansions.

I bought this tray to organize the tokens in a board game Im creating. The tray is very well made, easy to assemble, and affordable. It works perfectly and allows for the separation of up to 8 different types of tokens. You could also use the tray to separate decks of cards. I also purchased the smaller version, which allows for the separation of 6 items instead of 8, and Im happy with it too. The Broken Token makes very high quality products. A+++++